GratKit water washable 3D printing resin is the upgraded version compared to current market waster washable resins. It comes with almost no odor and is super easy to clean. It is totally water washable while cleaning.
GratKit water washable photopolymer resin stands with industrial standard quality. The upgraded formula upgraded water washable 3D printing resin to a new stage. Yet it still keeps the original technical performances like speedy printing and curing, high precision and low shrinkage, low viscosity, and good fluidity.
GratKit water washable 3D printing resin compatible with mainstream resin 3D printers with wavelength 405nm SLA and DLP. Compatible brands cover Anycubic, Creality, ELEGOO, and NOVA, to list just a few.
【Easy to Clean】GratKit Water Washable 3D Printing Resin comes with upgraded formula compared with the market water washable resins. The resin is super easy to clean with water only.
【Almost no Odor】GratKit Water Washable 3D Printing Resin is harmful substances free. With the upgraded formula, it has nearly no odor.
【Upgraded Protection Bottle】GratKit Water Washable Photopolymer Resin is packed in bottles with an anti-slip design. An aluminum foil wafer is used to seal the bottle so the resin can be kept in good condition. GratKit has also built a needle on the bottle cap to help cut open the Al-foil easily.
【Applicable to Mainstream Resin Printers】GratKit Water Washable 3D Printing Resin is compatible with all mainstream resin printers from manufacturers like GratKit, Nova3d, QIDI TECH, Phrozen, Creality, Anycubic, Elegoo.
【Industrial Standard Quality】GratKit aspires to gratify the demand for smart manufacturing. All products are designed and manufactured with industrial standard quality.
【DIY Colors】GratKit invites the world to DIY colors according to the CMYK color palette by using GratKit resins in basic colors (Cyan, Magenta, Yellow, and Black). GratKit 3D printing resins are listed with basic colors namely - black, gray, white, transparent, cyan, magenta, and yellow. However, GratKit offers all colors people can find on the market. For orders over 50kg, GratKit provides a color customization service.
- Type: Water washable 3D printing resin
- Viscosity: 200~450mPa·s (NDJ-8S viscosity meter (25℃))
- Density: 1.05~1.25g/cm3 (Density meter (25℃))
- Curing Wave Length: 385~410nm (405nm Recommend)
- Net weight: 1kg/5kg/10kg
Recommended Printing Settings:
- Bottom Exposure Time: 25-30s
- Exposure Time: 2.5-3.5s
- Bottom wait before cure: 3-5s
- Packed in a sealed bottle, an Opening needle is applied on the cap to cut open the Al-foil sealing.
- GratKit 3D printing resin is not reusable.
- Please avoid contact with the eyes or skin. Do not taste or ingest.
- Please use resin in places with good ventilation. Take protective measures and wash thoroughly after the operation.
- This item is liquid and has a slight odor. Please wear a mask while using to avoid inhalation of aerosol, that might cause allergies.
- This product should be stored in a sealed airtight container. Please keep it sealed after use and store it in well-ventilated and low-moisture places. Please do not expose the item to sunlight.
- In case accidentally inhaled, leave the scene in time to places with fresh air. Under the condition of the body's adverse effects, please go to the hospital or find a doctor for treatment.
- If the resin got swallowed, please do not induce vomiting. In that case, maintain a restful state, and go to the hospital for treatment in time.
- In case of contact with the skin, wash the skin thoroughly with soapy water or consult a doctor. If the resin accidentally contacts the eyes, rinse with soapy water immediately for about 20 minutes and seek medical help in time.
- Waste and wastewater should be disposed of following local environmental regulations.
GratKit Water Washable Resin Technical Datasheet
MATERIAL SAFETY DATASHEET