GratKit M5 8K Standard 3D Printing Resin, 1 kg UV-Curing Resin for 405nm SLA/LCD/DLP 3D Printer, High Precision and Low Shrinkage, 1000 g, White

GratKit M5 8K Standard 3D Printing Resin

Bullet Points

• High precision and low shrinkage: GratKit M5 standard resin is designed with low volume shrinkage and high printing accuracy during UV curing, ensuring the printed model with smooth surface and outstanding detail

• Good fluidity and low viscosity: GratKit standard resin has near water-like fluidity and low viscosity, which can increase the printing success rate;
• Low odour and safe: GratKit resin is manufactured with high quality raw materials, with extremely low odour, easy to clean; which can provide you with a better printing experience
  
• Upgraded bottle design: GratKit 3D printer resin is packed in impact resistant bottles with leak-proof AL foil, self-designed seal breaker on lid and anti-slip design on bottle;
• Wide compatibility: GratKit Standard is highly compatible with all mainstream 405nm DLP/LCD 3D printers from manufacturers like Nova3d, QIDI TECH, Phrozen, Creality, Anycubic, Elegoo.

Notes:

1. Please shake well before use.
2. Packed in a sealed bottle, an opening needle is applied on the cap to cut open the Al-foil sealing.
3. GratKit 3D printing resin is not reusable.
4. Please avoid contact with the eyes or skin. Do not taste or ingest.
5. Please use resin in places with good ventilation. Take protective measures and wash thoroughly after the operation.
6. This item is liquid and has a slight odor. Please wear a mask while using to avoid inhalation of aerosol, that might cause allergies.
7. This product should be stored in a sealed airtight container. Please keep it sealed after use and store in well-ventilated and low-moisture places. Please do not expose the item to the sunlight.
8. In case accidentally inhale, leave the scene in time to places with fresh air. Under the condition of the body's adverse effects, please go to the hospital or find a doctor for treatment.
9. If the resin gets swallowed, please do not induce vomiting. In that case, maintain a restful state, and go to the hospital for treatment in time.
10. In case of contact with the skin, wash the skin thoroughly with soapy water or consult a doctor. If the resin accidentally contacts the eyes, rinse with soapy water immediately for about 20 minutes and seek medical help in time.
11. Waste and wastewater should be disposed of following local environmental regulations.

TECHNICAL DATASHEET

Updating...

MATERIAL SAFETY DATASHEET

Updating...